ICS – Standard Coupler

INSTALLATION:

  1.  Press the couplers on the steel bars using INCON swaging machine.
    ics-standard-coupler-1
  2. Align the two bars and rotate one bar to completely secure the connection.
    ics-standard-coupler-2

CONFIGURATION:

INCON ICS – Standard Coupler is composed of a female and a male sleeves swaged on two bars to be connected.

MAIN APPLICATION:

INCON ICS – Standard Coupler is widely used for general applications to connect to bars of the same diameter where the rotation and axial movement of at least one bar is allowed.

Features:

Applicable for high strength reinforcing bars up to ASTM Grade 75.
Satisfies the requirements of ACI 318, BS 8110, UBC 1997, NF 35-20-1 and DIN 1045.
Easily installed and highly efficient for preparing the splice and assembly on site.
Accurate splice length control due to the precise coupler joint.
Highly reliable and consistent performance due to our swaging technology and enhanced coupler design.
Compact design of the coupler to reduce reinforcement congestion.

AVAILABLE MATERIALS AND COATINGS:

Uncoated steel couplers for splicing steel bars in typical construction applications.
Zinc coated steel couplers for splicing steel bars in corrosive environments and for other special applications.
Stainless steel couplers for splicing stainless steel bars and for other special applications.
Galvanized steel couplers for splicing galvanized steel bars and for other special applications.

TECHNICAL DATA:

tech-data-ics-standard-coupler
tech-data-ics-standard-coupler-chart