ICP – Position Coupler

INSTALLATION:

  1. Press the long and short coupler sleeves at the end of each bar and align them with each other.
    icp-position-coupler
  2. Insert the threaded rod completely into the extended coupler sleeve.
    icp-position-coupler
  3. Bring the second steel bar closer to the first one, then rotate the threaded rod in the opposite direction.
    icp-position-coupler
  4. Tighten the nuts to ensure strong attachment between the two bars.icp-position-coupler

CONFIGURATION:

INCON ICS – Position Coupler is composed of a female coupler sleeve, an extended coupler sleeve assembly, a central bolt and two nuts.

MAIN APPLICATION:

INCON ICS – Position Coupler is suitable for the most challenging connections when rotation in both bars is restricted while the translational movement of only one bar is allowed.

Features:

Applicable for high strength reinforcing bars up to ASTM Grade 75.
Satisfies the requirements of ACI 318, BS 8110, UBC 1997, NF 35-20-1 and DIN 1045.
Significantly reduces construction time.
Accurate and fast connection of steel bars that are restricted against rotational movement.
Easily installed and highly efficient for preparing the splice and assembly on site.
Accurate splice length control due to the precise coupler joint.
Highly reliable and consistent performance due to our swaging technology and enhanced coupler design.
Compact design of the coupler to reduce reinforcement congestion.

AVAILABLE MATERIALS AND COATINGS:

Uncoated steel couplers for splicing steel bars in typical construction applications.
Zinc coated steel couplers for splicing steel bars in corrosive environments and for other special applications.
Stainless steel couplers for splicing stainless steel bars and for other special applications.
Galvanized steel couplers for splicing galvanized steel bars and for other special applications.

TECHNICAL DATA:

tech-data-ics-position-coupler
tech-data-ics-position-coupler-chart